TX-4060S Pneumatic T-Groove Plane Screen Printing Machine.
Scope of application
It is suitable for plane printing of glass, optical disc, nameplate, self-adhesive, credit card, ceramic flower paper, Wooden Toy Puzzle, PCB, SMT solder paste, film switch and other products in electronic industry. It is also suitable for plane printing of products with high overprint accuracy based on gold and silver card paper, metal sheet, PVC, etc

Configuration description

① The machine is controlled by microcomputer.
② The circuit adopts Delixi AC contactor and Felix optoelectric eye proximity switch.
③ The printing adopts Taiwan Wanxin gear reduction motor and Taiwan Shilin frequency converter to control the printing drive.
④ The printing scraper / ink return knife is controlled by Taiwan brand pneumatic components.
⑤ HIWIN (Shangyin) precision linear guide rail made in Taiwan is used for left and right horizontal scraping.
⑥ The printing platen adopts self-produced aluminum alloy profile to finish milling T-groove, which is convenient for clamping and positioning of printing fixture.

Main parameters

Machine maintenance

① Clean up the debris on the machine before going to work and wipe the machine clean. Lubricating grease should be added regularly to moving parts such as guide rails, guide posts, and bearings.

② The work table is a key component that affects the printing quality. It prevents hard objects from hitting. When printing, ink cannot be used. Organic solvents such as thinner water drip onto the work surface.

③ The electronic control panel and buttons should be prevented from direct or indirect contact with solvents such as thinner water, boiling oil and water and causing damage.

④ The frame paint is to keep the machine from rusting, and to prevent direct or indirect contact with solvents such as thinner, boiling oil and water and causing damage.

⑤ Discharge the sewage and dirt in the oil mist combiner in time. Prevent it from being sent into the pneumatic components, affecting normal operation, and clean the cup regularly, and add Peng 2 lubricating oil into the oil cup of the oil mist combiner.

⑥ When adjusting the restrictor valve, the compression nut must be loosened before manual adjustment. The handle screw on the machine is used for positioning. After the positioning is firm, there is no need to tighten it excessively.

⑦ After get off work, turn off the power/air source, clean the screen, and keep it properly. Dust/pressure/hard object puncture-proof.

Notes: we are always improving and innovating in technology and quality. All machines can be designed according to those given parameters and requests from customers. Parameters and instruction in this catalog are only for reference.