Scope of application
Finely grind all kinds of squeegee to make the squeegee level and sharpness better.
|Transmission motor||120W||grinding angle||90°|
|Grinding size||1000mm||total power/power||220V/50HZ/1.32KW|
|Rotating speed||2850r/min||front and rear fine-tuning||0-8cm|
|fine-tuning up and down||0-10cm||Dimensions||1550*620*1000mm|
①Special design, the use of a card lock to disassemble and assemble the squeegee can adjust the deformed squeegee to ensure the quality and efficiency of grinding; the grinding angle is adjustable (0—±45°) to match the effects of various special printing, operation Simple, suitable for all kinds of printing squeegees, so that the squeegee can be regenerated many times.
②The grinding effect of gold steel grinding wheel is better
① Before going to work, clean up the sundries on the machine and wipe the machine clean. Lubricating grease should be added regularly to moving parts such as guide rails, guide posts, and bearings.
② The workpiece table is a key component that affects the printing quality. It prevents the impact of hard objects. During printing, the ink cannot be removed. Organic solvents such as Tianna water drip onto the work surface.
③ The electric control panel and buttons should be prevented from being damaged by direct or indirect contact with solvents such as Tianna water, boiled oil and water.
④ The frame paint is to keep the machine from rusting, to prevent damage caused by direct or indirect contact with solvents such as Tianna water, boiled oil and water.
⑤ Drain the sewage and dirt in the oil mist combiner in time. To prevent the pneumatic components from being fed into the normal operation, clean the cup body regularly, and add Peng 2 lubricating oil to the oil cup of the oil mist combiner.
⑥ When adjusting the restrictor valve, the tightening nut must be loosened before adjusting by hand. The handle screw on the machine is used for positioning. After firmly positioning, there is no need to tighten it with excessive force.
⑦ After get off work, turn off the power/air source, clean the wire mesh, and keep it properly. Dust/pressure/hard object piercing.