How to print battery car logo

Category: Applications

Finished printed products

Semi-auto flat screen printing machine specially designed for battery car logo, a device that helps you print designs or patterns on battery car logos. It can save you time and effort, and is the first choice for many battery car label merchants. In this blog post, we will briefly discuss how to use a semi-automatic flat screen printer.


Be applied to the flat printing for glass, CD, nameplate, stickers, credit card, Ceramic colored paper, wooden toy puzzles,PCB,SMT tin ointment, and membrane switches in electronic industry .It is also applicable to the flat printing such as golden and silver cardboard ,metal sheet, and other products with the material of  PVC, which have high requirement in overprinting.


1.vertical structure with the motor driven printing plate goes up and down vertically, and the motor driven print head moves left/right.

  1. Single chip controlled circuit, printing and plate goes up and down using independent driving source.
  2. Pneumatic controller controls the printing knife moves up and down, photocell eye controls the stroke, which is independent to tune.
  3. Set manual/semi-automatic /automatic three modes , the break time of printing is digital controlled.
  4. Independent designed head rising and down setting, makes it convenient to clean the scraping blade/reclaiming blade、screen plate during loading and unloading.
  5. Double guide column master the clamps arm, and install the adjusting device to adjust the distance between plates at the same time, which is convenient to tune.
  1. The machine controlled by SCM
  2. Adopt Famous brand Electronic parts to make sure the quality
  3. 3. Printing scraper and reclaiming blade controlled by brand pneumatic component.
  4. 4. Moves up and down/left and right during printing, controlled by Taiwan ABBA Precision guide rod.

5.Left/right scratchers adopt HIWIN precision liner guide from Taiwan.

6.Printing plate adopts pneumatic stainless steel and suction system which is produced by Shanghai State-owned factory.

Model TX-4060ST Printing Thickness ≤30
max printing area 400x600mm Air pressure 4.0~6.0 kfg/c㎡
size of printing table 500x700mm Rated voltage/Power 380V/50HZ /2.2KW
Max printing speed 1000(PCS/H)  
Previous Post
How to print on carton
Next Post
Do you know how the lettering on the trash cans we see everywhere is printed

Related news

google-site-verification: googleb36f6ce525dc7e51.html