Expert in Bottle Printing Equipment

Innovative Technology-leading Precision Screen Printing Machine Manufacturer

Home / All / Application Cases / Application Case of Logo Screen Printing and UV Curing on Cantilever Housing of Intelligent Hanging System

Application Case of Logo Screen Printing and UV Curing on Cantilever Housing of Intelligent Hanging System

Update Time:2026/11/21 20:07:51
Application Case of Logo Screen Printing and UV Curing on Cantilever Housing of Intelligent Hanging System
Application Case of Logo Screen Printing and UV Curing on Cantilever Housing of Intelligent Hanging System
In the processing of sheet metal exterior parts for intelligent hanging systems, the cantilever shell is the main component bearing the brand logo on the front of the equipment. This project focused on printing the logo and decorative lines on the JACK brand hanging sheet metal shell, completing the full process verification from tooling adaptation, screen printing to UV curing, and achieving stable batch delivery results.

I. Customer Needs

The part to be processed is a long, cantilevered sheet metal shell. The customer has two core requirements: First, precise positioning and printing. The brand logo and decorative lines must be consistent with the shell's holes and outline reference positions. During mass production, the deviation must be controlled within the allowable range, and there must be no off-center printing, skewing, or missing printing. Second, the ink must not fade after printing. The shell surface is a sprayed paint surface, which is subject to friction and cleaning in daily life. The ink layer must adhere firmly and not peel off or flake after wear-resistant wiping. The markings must not become blurred after long-term use.

II. Core Solutions

Taking into account the elongated, curved shape of the outer casing and the positioning holes, the technical team first customized a special tooling fixture to fit the outer casing shape and positioning holes, enabling rapid fixation and benchmark positioning of the workpiece on the screen printing table, reducing manual placement errors. Printing uses UV inks adapted to sheet metal surfaces, followed directly by an LED UV curing process. The UV light energy rapidly cross-links and cures the ink, improving ink adhesion and shortening drying time, preventing scratches and smudges caused by wet ink buildup.

III. Equipment Used

This project mainly involves two pieces of equipment: 1. A TX-40150ST semi-automatic flatbed screen printing machine (with positioning fixtures) , responsible for screen printing the logo and decorative lines on the outer shell . The table is well-suited for long sheet metal parts, and the squeegee pressure and stroke are adjustable, making it easy to control the ink layer thickness and positional accuracy; 2. An LED800-UV curing machine, responsible for the post-printing curing of UV ink. The conveyor belt transports the workpiece, and the LED ultraviolet light source irradiates the ink to cure it instantly, meeting the needs of continuous batch processing.

IV. Printing Operation Procedures and Precautions

1. Operating Procedure: 

Step 1: Clean the surface of the outer shell before printing to remove dust, oil, and residual particles, ensuring a clean substrate. 
Step 2: Place the outer shell into the positioning fixture , aligning the positioning holes and the outer shape reference, ensuring it is stable and secure. 
Step 3: Install and align the screen, check the printing position , and perform a trial print on a single piece to check for deviations. 
Step 4: Mix the UV ink, control the viscosity and squeegee parameters , and proceed with formal printing only after confirming a uniform ink layer without any exposed ink or stringing. 
Step 5: Feed the work piece into the UV curing machine , matching the light source intensity and conveyor speed to complete the curing process. Step 6: After curing, randomly inspect the appearance, position, and adhesion; qualified parts are transferred to the next process.

2、Precautions: 

The outer shell surface must be cleaned of dust and oil first, as an unclean base surface will lead to a decrease in adhesion; UV ink should be prepared according to process requirements, and prolonged storage should be avoided to prevent it from affecting curing; the curing energy and conveying speed must be matched with the ink, as insufficient curing will easily cause color fading, while over-curing will affect the appearance; avoid touching the uncured ink surface during transportation, and ensure proper spacing and protection when stacking finished products to prevent scratches.

V. Final Printing Results

After screen printing and UV curing, the blue JACK brand logo and decorative lines on the outer shell are clear, complete, and uniformly positioned, with a smooth and even ink layer. Below are actual photos of the finished product and the curing process:

VI. Customer Feedback

Equipment delivery, customer feedback indicated that the logo placement on the bulk casings was consistent, with no obvious misalignment or printing errors; the cured ink layer adhered firmly, and no fading or ink loss occurred after abrasion and wiping; the markings were clear and complete. The entire process, combined with a semi-automatic screen printing machine and UV curing line, balances positioning accuracy, printing quality, and production efficiency, meeting the batch processing requirements for markings on sheet metal casings of hanging systems.

Are you looking for a reliable precision screen printing machine manufacturer?

We can quickly provide customers with market analysis, technical support and customized services.

Innovative Technology-leading Precision Screen Printing Machine Manufacturer

Follow Us